Engine

Rated output
35 kW (48 hp) at 8,750 rpm
Emission control
Closed-loop 3-way catalytic converter
Type
Water-cooled 2-cylinder, four-stroke engine with four cam-operated valves per cylinder, two overhead camshafts and wet-sump lubrication
Capacity
420 ccm
Bore x stroke
72 mm x 51.6 mm
Max. torque
43 Nm at 6,750 rpm
Compression ratio
13.0 : 1
Mixture control
Electronic intake pipe injection / digital engine management system with throttle-by-wire
Exhaust emission standards
EU 5+

Performance / fuel consumption

Maximum speed
169 km/h
Fuel consumption per 100 km based on WMTC
3.8 l
CO2 emission based on WMTC
88 g/km
Fuel type
Super unleaded (max. 10% ethanol, E10), 95 ROZ/RON, 90 AKI, Super unleaded (max. 25% ethanol, E20) E15-E25, 95 ROZ/RON, 90 AKI

Electrical system

Alternator
Permanent magnet alternator with 364 W (nominal power)
Battery
12 V / 9 Ah, maintenance-free

Power transmission

Clutch
Multiplate clutch in oil bath, anti-hopping clutch, mechanically operated
Gearbox
Claw-shifted 6-speed gearbox integrated in the transmission housing
Drive
Chain drive ratio 15/47
Traction control
BMW Motorrad DTC

Chassis / brakes

Frame
Steel tube frame with load-bearing engine, steel tube sub-frame
Front wheel location / suspension
Upside-down telescopic fork, diameter 43 mm
Rear wheel location / suspension
Aluminum twin-sided swingarm, compression and rebound damping adjustable shock absorber
Suspension travel, front / rear
140 mm / 140 mm
Wheelbase
1,404 mm
Castor
111 mm
Steering head angle
23.4°
Wheels
Aluminium cast wheels
Rim, front
3.00 x 17"
Rim, rear
4.00 x 17"
Tyre, front
110/70 ZR17
Tyre, rear
150/60 ZR17
Brake, front
Single disc brake, floating brake discs, diameter 310 mm, Brembo 4-piston fixed caliper
Brake, rear
Hydraulic single disc brake, rigid brake disc, diameter 240 mm, 1-piston floating caliper
ABS
BMW Motorrad ABS Pro

Dimensions / weights

Seat height at unladen weight
790 mm
Inner leg curve at unladen weight
1,770 mm
Usable tank volume
14 l
Reserve
approx. 2.5 l
Length
2,002 mm (over license plate holder)
Height
1,065 mm (without mirror, at DIN unladen weight)
Width
825 mm (over handlebar weight)
Unladen weight, road ready, fully fuelled
175 kg 1)
Permitted total weight
355 kg
Payload (with standard equipment)
180 kg

1) According to Guideline (EU) 168/2013 with all operating fluids, with standard equipment and refuelled with min. 90% of the usable fuel tank capacity.

spinner